JLG 544D10-55 Telescopic Forklift

The Gradall model 544D telehandler combines a 10,000-pound capacity and 55-foot lift height to reach the top of its class. A new protective cab design and standard equipment stabilizers enhance the productivity and performance of this big machine.

Categories ,

Performance

Rated Capacity

  • At 24 in. (610 mm) load center,
    10,000 lb (4,536 kg)

Maximum Lift Height

  • 55 ft (16.8 m)

Frame Leveling

  • 8 degrees

Lift Speed (boom retracted)

  • Up: 11.9 sec
    Down: 9.3 sec

Boom Speed

  • Extend: 18.3 sec
    Retract: 17.6 sec

Travel Speed Forward

  • 2WD 0-19 mph (30.6 kmph)
    4WD 0-6.5 mph (10.5 kmph)

Drawbar Pull (Loaded)

  • 18,400 lb (8,346 kg)

Operating Weight

  • With 48 in. (1.2 m) carriage and forks,
    33,570 lb (15,227 kg)

Standard Specifications

Engine

  • Make and Model:-
    John Deere 4045HF275
    Turbocharged and Aftercooled
  • Fuel No.:-  2 Diesel
  • Cycles:-  4
  • No. of Cylinders:- 4
  • Displacement:- 276 cu in (4.5 L)
  • Rated Speed:- 2,500 rpm
  • Max. Gross BHP:- 125 hp (93 kW)
  • Fuel Tank:- 38 gal (144 L)

 

Engine Filters

  • Two-stage dry air cleaner — centrifugal pre-cleaner with continuous dust ejector plus replaceable dry filter element.
  • Visual service indicator.
  • Replaceable spin-on fuel filter. Full-flow replaceable spin-on engine oil filter.

Electrical System

  • Voltage: 12V
  • Alternator: 65 amp
  • Battery: 1050 cold cranking amps at 0°F

Hydrostatic Drive

  • 6,300 PSI (43,437 kPa) closed loop with piston pump and motors.
  • All hydraulic connections ORS and Code 62 O-ring flanges.
  • Integral reservoir with implement hydraulics.
  • 8 micron suction filter for charge pump.
  • Self-contained, swashplate design, variable displacement, over center, piston pump.
  • Neutral start switch. (Park brake must also be engaged to start.)
  • 2WD — 4WD inching.
  • Audible back-up travel alarm mounted in counterweight area signals reverse movement.

Axles

  • Planetary hubs with piston motors on rear axle.
  • Piston motor-driven planetary front axle with high-bias differential.

Service Brakes

  • Hydraulic wet disc brake on each front wheel.
  • Hydraulic dynamic braking on front axle and both rear wheels.

Parking Brakes

  • Wet disc spring-applied electro/hydraulic release, fail-safe on both front wheels.
  • Light on dash indicates when brakes are on.

Tires

  • Standard: 14:00 x 24 — 12PR, G2 type.
  • Optional: Radial 14:00 x 24 — 12PR.

Cab

  • Certified ROPS/FOPS structure with horn, back-up alarm and standard right side rear view mirror.
  • Forward, neutral, reverse lever on left of steering column.
  • Single foot pedal control provides both braking and inching for lifting while maneuvering vehicle.
  • Electro/hydraulic traction lock valve for superior tractive effort.

Steering

  • Hydraulic power steering with manual backup.
  • Rear wheel steering, 90° pivot around either front tire.
  • Outside turning radius is less than chassis length.

Instruments

  • Volt meter, hourmeter, engine oil pressure, temperature, fuel gauge.
  • All gauges protected by clear acrylic cover.

Controls

  • Grouped for operator comfort and convenience.
  • 2WD and 4WD switch on dash.
  • Boom lift and crowd on single joystick.
  • Right-hand tilt and sway lever.
  • Foot throttle.
  • Floor mounted traction lock switch.

Hydraulic System-Implement

  • Single-section gear pump.
  • 40 gal (151.4 L) system capacity.
  • 8 micron filter with visual service indicator and suction strainer.
  • Lift, crowd, tilt and sway cylinders have safety checks to prevent dropping of load in the event of hose or other hydraulic failure.

Auxiliary Hydraulics

  • Used for all attachments equipped with cylinders or other hydraulic components.
  • Consists of valves, controls and hydraulic lines

Accessories & Options

Cab Enclosure

  • Lockable, split door.
  • Windshield wiper.
  • Heater & defroster fan.

Light Group

  • Consists of 2 cab-mounted headlights,
  • 1 backup/tail/stoplight and rotating beacon.

Radial Tires
Winch
Left Hand Tilt/Sway Control
Tilt on Joystick

Attachments

Standard Carriage

  • 48 in. (1.2 m), 66 in. (1.7 m) or 72 in. (1.8 m)

Side Tilt Carriage

  • 48 in. (1.2 m) or 66 in. (1.7 m)

100° Swing Carriage

  • 72 in. (1.8 m) Carriage

180° Swing Carriage

  • 72 in. (1.8 m)

100° Drywall Swing Carriage

  • 72 in. (1.8 m)

Pallet Forks

  • 2 x 6 x 48 in.
    (51 mm x 152 mm x 1.2 m)

Cubing Forks

  • 2 x 2 x 48 in.
    (51 mm x 51 mm x 1.2 m)

Vertical Mast

  • 6 ft (1.8 m)

100° Swing Mast

  • 6 ft (1.8 m)

Truss Boom With or Without Winch

  • 10 ft (3.0 m)

Bucket

  • 0.75 cu yd (0.57 m3)
    or
    1.25 cu yd (0.95 m3)

Work Platform
Slip On Crane Hook
Instant Hook

HOW TO RENT OUR EQUIPMENT

1
Choose Your Equipment: Browse the equipment you need in our categories.
2
Place your Order: Request your equipment online or give us a call  to 310-330-2657
3
Pay the Rental fee: We will contact you to set up payment.
4
We deliver to you: LAX equipment Rental delivers your rented equipment right to your location.
Scroll to Top